Purrazzo Mix
FOX PURRAZZO MIX is a polyurethane resin-based, two-component, solvent-free bio-terrazzo decorative coating system with high chemical resistance, antibacterial properties and steam cleanability. Layer structure: PRIMER HB primer, FOX EPOTHANE® ISO-CRACK EP-2K crack-bridging membrane, quartz broadcast, FOX TERRAZZO L STRIP profile, FOX PURRAZZO MIX + aggregate + FILLER TF terrazzo, pore filling with the same binder, FD793 sealer + TOPCOAT WB clear matt top coat.
Purrazzo Mix is offered in 19 sample patterns (PU binder code × RAL colour); the aggregate choice (Standard / Crystal / Exotic, 1-3 / 3-6 / 6-9 mm) completes the pattern. The colour choice does not change the layer structure.
About Purrazzo Mix
Consumption figures are given for ideal conditions at +23 °C; a site survey with our expert team is recommended before the system solution.
Technical Specifications
Binder
FOX PURRAZZO MIX — polyurethane, two-component, solvent-free, 100% solids
Mixing Ratio
1 part binder : 3.85 parts aggregate : 1.25 parts FOX EPOTHANE® FILLER TF
Aggregate
FOX AGGREGATE Standard / Crystal / Exotic — 1-3 / 3-6 / 6-9 mm
Primer
FOX EPOTHANE® PRIMER HB + 0.1-0.3 mm quartz sand
Crack Bridging
FOX EPOTHANE® ISO-CRACK EP-2K + glass textile mesh 160 g/m²
Profile
FOX TERRAZZO L STRIP (aluminium, 8/20 mm)
Top Coat
FOX DOMINO® PU SEALER FD793 + FOX PURATHANE® TOPCOAT WB clear matt
Colour
19 sample patterns (PU code × RAL)
Density
1.17±0.05 g/cm³
Adhesion Strength
≥1.5 N/mm² to concrete
Shore D Hardness (7 days)
≥60
Taber Abrasion (CS10, 1 kg, 1000 cycles)
≥70 mg
Pot Life
35 dakika
Application Temperature
+10 °C / +30 °C
Ready for Use (20 °C)
Foot traffic 24 hours, light traffic 3 days, full cure 7 days
System Layers
-
1
Primer
RequiredEpoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.
Main Product 0,1-0,3 mm Kuvars Kumu (60-70 AFS)Epoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.
Main Product FOX EPOTHANE® PRIMER HBEpoxy based, two-component, solvent-free, low-viscosity clear primer for damp surfaces; 0,1-0,3 mm (60-70 AFS) quartz sand is broadcast onto it.
-
2
Crack-Bridging Membrane
RequiredEpoxy-polyurethane-based, 100% solids, flexible crack-bridging membrane; it prevents cracks from reflecting through to the surface. Applied together with the anti-fracture glass textile system mesh.
Main Product FOX CAM TEKSTİLİ FİLE 160 gr/m²Epoxy-polyurethane-based, 100% solids, flexible crack-bridging membrane; it prevents cracks from reflecting through to the surface. Applied together with the anti-fracture glass textile system mesh.
Main Product FOX EPOTHANE® ISO-CRACK EP-2KEpoxy-polyurethane-based, 100% solids, flexible crack-bridging membrane; it prevents cracks from reflecting through to the surface. Applied together with the anti-fracture glass textile system mesh.
-
3
Broadcast
RequiredBroadcasting of 1-2 mm quartz aggregate.
Main Product 1-2 mm Kuvars AgregaBroadcasting of 1-2 mm quartz aggregate.
-
4
Profile
RequiredAn aluminium profile 8/20 mm high, developed specifically to form patterns in Fox Terrazzo coating systems.
Main Product FOX TERRAZZO L STRIP 8/20 mmAn aluminium profile 8/20 mm high, developed specifically to form patterns in Fox Terrazzo coating systems.
-
5
Purrazzo Polyurethane Terrazzo
RequiredPolyurethane based, antibacterial, steam-cleanable decorative terrazzo coating; pigmented binder (selected PU × RAL combination) + natural coloured aggregate + resin based filler.
Main Product FOX EPOTHANE® FILLER TFPolyurethane based, antibacterial, steam-cleanable decorative terrazzo coating; pigmented binder (selected PU × RAL combination) + natural coloured aggregate + resin based filler.
Main Product FOX PURRAZZO MIXPolyurethane based, antibacterial, steam-cleanable decorative terrazzo coating; pigmented binder (selected PU × RAL combination) + natural coloured aggregate + resin based filler.
Main Product FOX AGREGA STANDART / KRİSTAL / EGZOTİK — 1-3 / 3-6 / 6-9 mmPolyurethane based, antibacterial, steam-cleanable decorative terrazzo coating; pigmented binder (selected PU × RAL combination) + natural coloured aggregate + resin based filler.
-
6
Pore Filling
RequiredFilling of the pores after grinding with the same pigmented Purrazzo Mix binder.
Main Product FOX PURRAZZO MIXFilling of the pores after grinding with the same pigmented Purrazzo Mix binder.
-
7
Top Coat
RequiredPolyurethane based sealer + clear matt topcoat: a UV resistant, non-yellowing, dust-proofing, water-repellent protection layer followed by a water-borne, aliphatic clear matt top coat with high abrasion and scratch resistance.
Main Product FOX PURATHANE® TOPCOAT WBPolyurethane based sealer + clear matt topcoat: a UV resistant, non-yellowing, dust-proofing, water-repellent protection layer followed by a water-borne, aliphatic clear matt top coat with high abrasion and scratch resistance.
Main Product FOX DOMINO® PU SEALER FD793Polyurethane based sealer + clear matt topcoat: a UV resistant, non-yellowing, dust-proofing, water-repellent protection layer followed by a water-borne, aliphatic clear matt top coat with high abrasion and scratch resistance.
System Detail
| Stage | Product / Application Type | Colour |
|---|---|---|
| Primer | 0,1-0,3 mm Kuvars Kumu (60-70 AFS) | |
| Primer | FOX EPOTHANE® PRIMER HB | Clear |
| Crack-Bridging Membrane | FOX CAM TEKSTİLİ FİLE 160 gr/m² | |
| Crack-Bridging Membrane | FOX EPOTHANE® ISO-CRACK EP-2K | |
| Broadcast | 1-2 mm Kuvars Agrega | |
| Profile | FOX TERRAZZO L STRIP 8/20 mm | |
| Purrazzo Polyurethane Terrazzo | FOX EPOTHANE® FILLER TF | |
| Purrazzo Polyurethane Terrazzo | FOX PURRAZZO MIX | |
| Purrazzo Polyurethane Terrazzo | FOX AGREGA STANDART / KRİSTAL / EGZOTİK — 1-3 / 3-6 / 6-9 mm | |
| Pore Filling | FOX PURRAZZO MIX | |
| Top Coat | FOX PURATHANE® TOPCOAT WB | Clear Matt |
| Top Coat | FOX DOMINO® PU SEALER FD793 | Clear |
System Products
Frequently Asked Questions
-
Which floors can it be applied to?
Applied to concrete floors at least 3 weeks old with ≥25 N/mm² compressive and ≥1.5 N/mm² tensile strength; moisture must be ≤4%, the floor temperature at least +10 °C and 3 °C above the dew point. Cement laitance is removed by shot blasting, milling or diamond grinding; repairs are made with FOX EPOTHANE® PRIMER + quartz sand mortar. -
Is the Intermediate Coat (FOX EPOTHANE® BASECOAT) mandatory?
No, it is optional; it is applied if there is undulation on the surface or if preferred. For conditions outside the standard, contact technical service for system details. -
How is it maintained?
The seamless (jointless) surface does not hold dirt; it is easy to clean, requires minimum maintenance and is simple to repair. After application the coating must be protected from direct water contact for at least 24 hours. -
What are the colour options?
Each Purrazzo system is offered with its own colour chart; the desired design can be achieved with different RAL colour options. The colours on the chart may differ from the original colours depending on the printing technique and the ambient light. -
What sets Mix apart from epoxy terrazzo?
Its binder is polyurethane: it is antibacterial, steam-cleanable and flexible. The pattern is determined by the PU binder × RAL colour combination and the aggregate choice (Standard / Crystal / Exotic, 1-3 / 3-6 / 6-9 mm). -
Is the crack-bridging membrane mandatory?
Yes. The FOX ISO-CRACK epoxy membrane system is mandatory before terrazzo coatings in order to prevent existing and potential cracks in the concrete surface from reflecting onto the terrazzo surface.









