Olympos Stucco • Lavanda • LIMYRA

Olympos Stucco

FOX OLYMPOS STUCCO is a cement-based decorative plaster system that can be burnished and patterned. Over the same primer and top-coat protection layers, the coating product and the application tool change according to the selected shaping technique; each technique produces its own distinctive surface texture.

Olympos Stucco Limyra is the system applied with FOX DOMINO® WALL FD787 and shaped with the Limyra technique. Your choice of shaping technique determines the layer structure, the section drawing and the consumption; the colour is selected from the same FOX DOMINO® COLOR palette in every technique.


Shaping Technique
Stucco ColoursLavanda
Application Area

About Olympos Stucco Limyra

Every Stucco application is the reflection of your imagination on your walls. With Olympos Stucco, every wall in your spaces tells a story of its own. Olympos Stucco Limyra is applied with FOX DOMINO® WALL FD787, a decorative coloured top-coat plaster made from special cement, flexible polymer additives and fillers, and is shaped with the Limyra technique.
The surface is primed with FOX PRIMERA® FL220 and FOX DECOPRIMER FL204. Two coats of FOX DOMINO® WALL FD787 are applied; the pattern is created with a press-and-pull movement of the steel trowel, the surface is smoothed and sanded with 220 grit abrasive. Finally, FOX DOMINO® AC SEALER FD790 is applied in two coats with a short-pile velvet roller, making the surface water-repellent and dust-free. This product is not merely a wall covering but a surface that reflects the character of your space: it creates a seamless wall, is applied quickly and easily, and can be burnished and patterned.

The layers above and the products specified in those layers are given for standard conditions. For conditions outside the standard, please contact our technical service for system details and further information.

Technical Specifications


System Type

Cement-based decorative plaster system that can be burnished and patterned

Shaping Technique

Limyra

Coating Product

FOX DOMINO® WALL FD787

Coating Consumption

approx. 4 kg/m² (total)

Primer

FOX PRIMERA® FL220 (approx. 0.08 kg/m²) + FOX DECOPRIMER FL204 (approx. 0.30 kg/m²)

Top Coat Protection

FOX DOMINO® AC SEALER FD790, 2 coats, approx. 0.15 kg/m²

Colour

FOX DOMINO® COLOR palette: Stone Grey, Olive Grey, Charcoal, Smoky, Cream, Oyster, Dale, Beige, Tortora, Cappuccino 25%, Cappuccino 50%, Brown 50%, Terracotta, Blue Nile, Marine, Avocado Green, Yellow, Lavanda

Area of Use

Interior and exterior walls

Application Temperature

+5 °C / +30 °C (ambient, surface and material)

Compressive Strength (EN 1015-11, 28 days)

≥6 N/mm²

Flexural Strength (EN 1015-11, 28 days)

≥2 N/mm²

Adhesion to Substrate (EN 1015-12)

≥1 N/mm²

Reaction to Fire (EN 13501-1)

A1

Pot Life

~30 minutes

Full Curing

28 days

Abrasive Paper

220 kum

Surface Protection (FD790)

Drying 6 hours, second coat after 4 hours; water-repellent, prevents dusting

System Layers


Wall
Primer
Primer
Coating
Dampening
Coating
Top Coat
Layers & Products6 layers
  1. 1

    Primer

    Required
    Main Product FOX PRIMERA® FL220
    ~0.08 kg/m²

    General-purpose, water-based, clear, universal primer for absorbent and highly absorbent surfaces

    Packaging
    1 lt
    10 lt
    20 lt
    5 lt
  2. 2

    Primer

    Required
    Main Product FOX DECOPRIMER FL204
    ~0.3 kg/m²

    Fast-drying, multi-purpose primer for decorative finish coat renders and microcement coatings

    Packaging
    8 kg
    3 kg
  3. 3

    Coating

    Required
    ~2 kg/m²

    Decorative Coloured Finish Coat Render

    Packaging
    25 kg
  4. 4

    Dampening

    Required
    Main Product FOX PRIMERA® FL220
    ~0.05 kg/m²

    General-purpose, water-based, clear, universal primer for absorbent and highly absorbent surfaces

    Packaging
    1 lt
    20 lt
    10 lt
    5 lt
  5. 5

    Coating

    Required
    ~2 kg/m²

    Decorative Coloured Finish Coat Render

    Packaging
    25 kg
  6. 5A

    Efekt

    Between Layers
    Press-and-pull is carried out with a plaster trowel.
  7. 5B

    Levelling

    Between Layers
    The surface is levelled with a plaster trowel.
  8. 5C

    Sanding

    Between Layers
    220 Kum
  9. 6

    Top Coat

    Required
    ~0.15 kg/m²

    An acrylic-based, one-component, water-based, dust-proofing, water-repellent finish coat protective material. The consumption figure is for 2 coats.

    Packaging
    5 kg

System Detail


StageProduct / Application TypeConsumption
PrimerFOX PRIMERA® FL2200.08 kg/m²
PrimerFOX DECOPRIMER FL2040.3 kg/m²
CoatingFOX DOMINO® WALL FD7872 kg/m²
DampeningFOX PRIMERA® FL2200.05 kg/m²
CoatingFOX DOMINO® WALL FD7872 kg/m²
Top CoatFOX DOMINO® AC SEALER FD7900.15 kg/m²

System Products

Frequently Asked Questions

  • Which surfaces can Stucco be applied to?

    It is applied to brick, block, concrete, fair-faced concrete, aerated concrete, gypsum plaster and gypsum concrete walls. The surface is freed from dust, oil and loose particles and made sound and dry; cracks and surface irregularities are repaired with suitable repair mortars. It is then primed with FOX PRIMERA® FL220 and FOX DECOPRIMER FL204.
  • What distinguishes the Limyra technique from the other techniques?

    All techniques use the same primer and protection layers; the difference lies in the coating product and the shaping tool. Two coats of FOX DOMINO® WALL FD787 are applied; the pattern is created with a press-and-pull movement of the steel trowel, the surface is smoothed and sanded with 220 grit abrasive.
  • Can it be used outdoors?

    Yes. The system is used on interior and exterior walls. Outdoors it must be protected from sun, rain, wind and frost for the first 24 hours; in hot weather the surface must be kept damp.
  • How is the colour determined, and can it be changed later?

    The colour comes from FOX DOMINO® COLOR pigment paste added to the mixing water of the coating layer; it is applied in Stone Grey, Olive Grey, Charcoal, Smoky, Cream, Oyster, Dale, Beige, Tortora, Cappuccino 25%, Cappuccino 50%, Brown 50%, Terracotta, Blue Nile, Marine, Avocado Green, Yellow and Lavanda. The surface can be renewed by applying a new coating layer over it.
  • Can it be wiped clean, and how is it maintained?

    The FOX DOMINO® AC SEALER FD790 top coat is water-repellent and prevents dusting; the surface can be wiped with a damp cloth. After application, the coating must be protected from direct contact with water for at least 24 hours.
  • What are the application conditions?

    The ambient, surface and material temperature must be between +5 °C and +30 °C. Materials are brought to site 1–2 days in advance so that they adapt to the ambient conditions; mixing is carried out with an electric mixer at 300–400 rpm. Consumption figures are given for ideal conditions at 23 °C; they increase on uneven surfaces and in cold weather.

Similar Systems

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Olympos Stucco — terracotta façade, landscaping
Olympos Stucco