Betonage Pool • White

Betonage Pool

FOX BETONAGE® POOL is a coloured pool coating system with a natural concrete look that allows minimalist designs in pools without seams or joints. Layer structure: FOX MULTISEAL® STANDART waterproofing, FOX UNIPRIMER FL555 primer, two coats of FOX BETONAGE® POOL BASECOAT BC, FOX UNIPRIMER FL555 transition primer, two coats of FOX BETONAGE® POOL FINISHCOAT FC and FOX DOMINO® AC SEALER FD796 top coat.

7 colours; the chart colours are obtained by mixing in FOX DOMINO® COLOR WB pigment. The colour choice does not change the layer structure.


Application Surface
ColourWhite

About Betonage Pool

Fox Betonage® Pool is a coloured coating with a natural concrete look that allows minimalist designs in your pools without seams or joints. With its resistance to temperature changes, its anti-slip properties and the scope it offers for more modern, ground-breaking designs, it is an ideal option for creating the pool you have in mind. Its monolithic appearance unites the pool with the terrace and its surroundings in a single material language.
The pool's reinforced concrete must have a compressive strength of at least 25 N/mm² and a tensile strength of 1.5 N/mm², with a moisture content below 4%; the cement laitance is removed with abrasive equipment. Waterproofing is completed with FOX MULTISEAL® STANDART and the surface is primed with FOX UNIPRIMER FL555. FOX BETONAGE® POOL BC is mixed with its polymer and FOX DOMINO® COLOR WB pigment (approx. 250 g polymer and approx. 10 g pigment per 1 kg of powder) and applied in two coats with a trowel to the dampened surface; each coat is sanded with 60 grit sandpaper once dry. After the FOX UNIPRIMER FL555 transition primer, FOX BETONAGE® POOL FC (approx. 312.5 g polymer and approx. 12.5 g pigment per 1 kg of powder) is applied in two coats. The surface is protected with at least two coats of FOX DOMINO® AC SEALER FD796 applied by roller or brush (4 hours between coats).

Consumption figures and times are given for +23 °C and 50% relative humidity; a site visit with our expert team is recommended before the system solution is defined.

Technical Specifications


System Type

Cement and polymer dispersion based jointless microconcrete pool coating

Waterproofing

FOX MULTISEAL® STANDART

Primer / Transition Primer

FOX UNIPRIMER FL555

Coating

FOX BETONAGE® POOL BASECOAT BC — 2 coats; 1 kg powder : ~250 g polymer : ~10 g pigment

Top Coat

FOX BETONAGE® POOL FINISHCOAT FC — 2 coats; 1 kg powder : ~312.5 g polymer : ~12.5 g pigment

Protective Coat

FOX DOMINO® AC SEALER FD796 — 100-200 g/m² (2 coats), 4 hours between coats

Colour

7 colours (White, Smoky, Stone Grey, Beige, Antique Beige, Green Almond, Blue Nile)

Compressive Strength (28 days)

BC ≥17 N/mm² · FC ≥11 N/mm²

Flexural Strength (28 days)

BC ≥7 N/mm² · FC ≥5 N/mm²

Adhesion Strength

To concrete ≥1 N/mm²

Pot Life

60 minutes (BC/FC)

Substrate

Concrete ≥25 N/mm², tensile ≥1.5 N/mm², moisture ≤4%, dew point above +3 °C

Application Temperature

+10 °C / +30 °C

System Layers


Pool
Primer
Waterproofing
Coating, 1st Coat
Coating, 2nd Coat
Transition Primer
Top Coat, 1st Coat
Top Coat, 2nd Coat
Top Coat
Layers & Products8 layers
  1. 1

    Primer

    Required

    Special primer material for absorbent and non-absorbent substrates.

    Main Product FOX UNIPRIMER FL555

    Special primer material for absorbent and non-absorbent substrates.

  2. 2

    Waterproofing

    Required

    Cement- and polymer-dispersion-based, two-component capillary waterproofing material that can be applied from the negative and the positive side.

    Cement- and polymer-dispersion-based, two-component capillary waterproofing material that can be applied from the negative and the positive side.

  3. 3

    Coating, 1st Coat

    Required

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — 1st coat. The colour is the selected chart colour.

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — 1st coat. The colour is the selected chart colour.

  4. 4

    Coating, 2nd Coat

    Required

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — 2nd coat.

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — 2nd coat.

  5. 5

    Transition Primer

    Required

    Special primer material for absorbent and non-absorbent substrates; a transition primer between the coating layers and the final top coat.

    Main Product FOX UNIPRIMER FL555

    Special primer material for absorbent and non-absorbent substrates; a transition primer between the coating layers and the final top coat.

  6. 6

    Top Coat, 1st Coat

    Required

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — top coat, 1st coat. The colour is the selected chart colour.

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — top coat, 1st coat. The colour is the selected chart colour.

  7. 7

    Top Coat, 2nd Coat

    Required

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — top coat, 2nd coat.

    Special cement and polymer dispersion based decorative pool coating material, applicable horizontally and vertically — top coat, 2nd coat.

  8. 8

    Top Coat

    Required

    Acrylic-based transparent protective coating used to prevent dusting on all types of concrete floors and to give them a glossy appearance.

    Acrylic-based transparent protective coating used to prevent dusting on all types of concrete floors and to give them a glossy appearance.

System Detail


StageProduct / Application TypeColour
PrimerFOX UNIPRIMER FL555Light Blue
WaterproofingFOX MULTISEAL® STANDARTGrey
Coating, 1st CoatFOX BETONAGE® POOL BASECOAT BC
Coating, 2nd CoatFOX BETONAGE® POOL BASECOAT BC
Transition PrimerFOX UNIPRIMER FL555Light Blue
Top Coat, 1st CoatFOX BETONAGE® POOL FINISHCOAT FC
Top Coat, 2nd CoatFOX BETONAGE® POOL FINISHCOAT FC
Top CoatFOX DOMINO® AC SEALER FD796Clear

System Products

Frequently Asked Questions

  • Which surfaces is the system applied to?

    It is applied to fully cured pool reinforced concrete with a compressive strength of at least 25 N/mm², a tensile strength of 1.5 N/mm² and a moisture content below 4%; to both horizontal and vertical surfaces. The surface is opened up to an open-pored condition with abrasive equipment and waterproofed with FOX MULTISEAL® STANDART.
  • How are the colours obtained?

    FOX BETONAGE® POOL BC and FC are stocked as a white powder; the 7 colours in the chart are obtained by adding FOX DOMINO® COLOR WB pigment to the mix. The colours in the chart may differ from the original depending on the printing technique and the ambient light.
  • Why jointless?

    The coating consists of microconcrete layers applied continuously with a trowel; as there are no seams or joints, the pool gains a monolithic, minimalist appearance and no dirt-collecting joint lines are formed.
  • How is it maintained?

    The surface is resistant to pool chemicals, non-slip and easy to clean, which keeps maintenance costs low. The protective top coat FOX DOMINO® AC SEALER FD796 can be renewed according to the intensity of use.
  • Are the floor and the wall done with the same system?

    Yes; FOX BETONAGE® POOL BC and FC can be applied to horizontal and vertical surfaces, and the pool floor and walls are coated with the same layer structure and colour.

Similar Systems

Let's Work Together

Let us find the right solution for your pool together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Betonage Pool application
Betonage Pool